SCC Release 7.1 |
PTL Release 7.1 |
|||||||||||||||||||||||
October 30, 2024 - Registered customers and companies trialing DTS products can enter the SCC Download Library to obtain the new release and documentation. |
May 26, 2023 - Registered customers and companies trialing DTS products can enter the PTL Download Library to obtain the new release and documentation. |
|||||||||||||||||||||||
|
|
Minimum Version Requirements
The following table documents the minimum required version of the DTS Software products for each currently supported IBM operating system release. While prior versions of the products may run on the selected operating system, the listed versions are the minimum supported versions.
Please note: 7.1 is the current release of the DTS Software products.
In general, users should run the most current version of all DTS Software products. All maintenance is backward-compatible so that the current version of any DTS Software product runs properly on any currently supported IBM operating system version.
Please see our End of Service page for our End of Service Policy and list of Service Levels that have reached EoS and their EoS date.
| OS Version |
Minimum Service Level |
DIF DLM ZVT |
ACC SRS SMSDEBUG DLMALLOC ZVTALLOC |
CMM | MON ABC PRECALL |
DSL | EXT | Simulate 2000 |
|---|---|---|---|---|---|---|---|---|
| z/OS 2.5 | SCC R7.1 SL21153 | 7.1.4 | 7.1.4 | 7.1.2 | 7.1.1 | 7.1.2 | ||
| PTL R6.1 SL20234 | 6.1.29 | 6.1.5 | ||||||
| z/OS 3.1 | SCC R7.1 SL23236 | 7.1.11 | 7.1.11 | 7.1.12 * | 7.1.5 | 7.1.2 | 7.1.6 | |
| PTL R6.1 SL20234 | 6.1.29 | 6.1.5 |
Notes:
-
* NOTE: CMM was released after the z/OS 3.1 minimum supported version and is only available in SCC R7.1 SL24214 and up. CMM is not available on SCC releases below SL24214.
-
IBM z/OS 3.1 has system changes that required updates to EXT processing. Upgrade to SL23236 or higher for successful execution. Earlier versions of EXT will fail.
-
IBM z/OS 2.5 has system changes that required updates to SRS ADDVOL processing. Upgrade to SL21153 or higher for successful execution. Earlier versions of SRS will fail.
-
IBM Db2 v12 has substantial changes that required source changes to ACC and SRS. Installations migrating to Db2 v12 must upgrade to at least SCC R6.1 SL18296. Previous versions of SCC may see S0C4 abends in the Db2 address space manager and failed jobs.
-
Your current version information can be obtained with the following DIF console command: "F DIF,STATUS"
-
The Dynamic Install Facility (DIF) is not a licensed product, but is a required component under which all of the other DTS Software products run.